Ciencias ambientales: una revista india
ISSN (PRINT):0974-7451

Abstracto

Microstructural and hardness of spray deposited Al-30Mg2Si-2Cu alloy in solutionized and aged conditions

Dayanand M.Goudar, G.B.Rudrakshi, G.Jagannatha Reddy, V.C.Srivastava, Jagdish Vagamode


AnAl–30Mg2Si- 2Cu alloy was produced by spray casting and the secondary processing such as hot compression and heat treatment were carried out. The coarsening behavior, distribution and size of the Mg2Si precipitates, the influence of subsequent heat treatment on the microstructure were investigated Uniform distribution of Mg2Si was achieved by spray casting. The hardness tests were conducted on spray deposited, secondary processed and heat treated alloys. The results indicate that spray casting has strong influence on microstructure and hardness of the material. The microstructural refinement of the alloy was enhanced during hot compression. The alloying with copper lead to further increase in strength by age hardening due to precipitation Al2Cu phase. A significant improvement in hardness was observed after hot compression and heat treatment.


Descargo de responsabilidad: este resumen se tradujo utilizando herramientas de inteligencia artificial y aún no ha sido revisado ni verificado.

Indexado en

  • CAS
  • Google Académico
  • Abrir puerta J
  • Infraestructura Nacional del Conocimiento de China (CNKI)
  • CiteFactor
  • Cosmos SI
  • Directorio de indexación de revistas de investigación (DRJI)
  • Laboratorios secretos de motores de búsqueda
  • Factor de impacto del artículo académico (SAJI))
  • ICMJE

Ver más

Revista ISSN

Índice h de la revista

Flyer

Revistas de acceso abierto